港汇 Welcome to the official website of GangHui!

Dongguan Ganghul Refrigeration
Electromechanical Equipment CO., Ltd.

Professional sales ofvarious brands of air-conditioning compressors, refrigeration
compressors and various brands of chillers, dryers and refrigeration accessories

Image name

Miss Deng:18922776417
Mr. Huang:13450460020
Mr. Zhang:13922978523

PUR hot melt adhesive tube curing material

22-07-26

PUR hot melt adhesive tube curing material

   PUR hot-melt adhesive tubes are reactive polyurethane hot-melt adhesives that, when applied in a molten state, exhibit a certain initial viscosity. After curing, they react with moisture on the substrate surface to form a strong bond. During the curing process, NCO groups react with moisture or substances containing active hydrogen, resulting in the formation of polymers with high cross-linking density. The curing process of PUR hot-melt adhesive tubes can be divided into two stages:


   Initial maintenance phase

   PUR hot-melt adhesive tubes have an initial viscosity and can bond to substrates through colloidal processes such as crystallization and molecular cross-linking. Most of the process during this stage is physical in nature, which is why it’s also referred to as physical solidification. The adhesive strength achieved during this stage can be called the initial adhesion strength.


   Final curing stage

   After initial curing, as curing continues, the NCO groups in the PUR hot-melt adhesive matrix fully react, increasing the degree of molecular chain crosslinking and further promoting molecular chain crystallization. Most of the processes during this stage are chemical in nature, which is why it’s also referred to as chemical curing. The bonding strength achieved after the PUR hot-melt adhesive matrix has fully cured is known as the final strength. While the physical curing of PUR hot-melt adhesives imparts an initial bonding strength to the prepolymers, it is the chemical curing that ultimately determines the PUR hot-melt adhesive’s final bonding strength.


 PUR hot melt glue tube


   Composition of PUR hot-melt adhesive tubing: PUR hot-melt adhesive tubing is primarily composed of macromolecular polyols, isocyanates, tackifying resins, and small amounts of additives and fillers.

   Macromolecular polyol

   Polymeric polyols constitute the soft segment of PUR hot-melt adhesive formulations and directly influence properties such as flexibility and low-temperature resistance of these adhesives. Polyester polyols contain a large number of ester groups, exhibit strong polarity, and have relatively high cohesive forces. Adhesives prepared using polyester polyols demonstrate excellent bonding performance and good heat and oil resistance, though their water resistance is relatively poor. Polyether polyols, on the other hand, contain a large number of ether linkages that are resistant to hydrolysis. Adhesives made from polyether polyols display outstanding hydrolytic stability, excellent low-temperature resistance, and high molecular-chain flexibility. However, due to their lower bonding strength, their overall adhesion performance is somewhat inferior. Typically, a combination of polyester and polyether polyols is used to adjust the proportions of ester groups, ether linkages, soft segments, and hard segments, thereby fine-tuning the flexibility and adhesion of the PUR hot-melt adhesive. Although both polyester and polyether polyols have certain inherent performance limitations when used individually, the crystallization kinetics of PUR hot-melt adhesives can be manipulated to compensate for these shortcomings. Consequently, in experimental studies, crystalline polyols are often selected as raw materials.


   Diisocyanate

   Common isocyanates include aromatic isocyanates and aliphatic isocyanates. MDI is a commonly used raw material in PUR hot-melt adhesive tubes. It features high reactivity and relatively low toxicity, making it suitable for fast-reacting polyurethane adhesives. Moreover, MDI has a symmetrical molecular structure, allowing its molecular chains to be engineered into a relatively ordered microphase-separated structure. As a result, the rubber layer exhibits excellent elasticity, bonding strength, and wear resistance. Stay tuned to Ganghui Refrigeration for more information on PUR hot-melt adhesive tubes.

Hong Kong dollar

Miss Deng:18922776417
Mr. Huang:13450460020
Mr. Zhang:13922978523

img

Email:1536214764@qq.com/ 673047694@qq.com
Company Address: No. 15, Alley 2, North of Lianhe Road, Fulong Village, Shipai Town, Dongguan City

Copyright © 2021 Dongguan Ganghui Refrigeration & Mechanical Equipment Co., Ltd.

Power by:www.300.cn | SEO | Privacy Policy 

Business license