港汇 Welcome to the official website of GangHui!

Dongguan Ganghul Refrigeration
Electromechanical Equipment CO., Ltd.

Professional sales ofvarious brands of air-conditioning compressors, refrigeration
compressors and various brands of chillers, dryers and refrigeration accessories

Image name

Miss Deng:18922776417
Mr. Huang:13450460020
Mr. Zhang:13922978523

How to Choose a Marine Compressor

23-03-10

How to Choose a Marine Compressor

  Marine compressors are, as the name suggests, used in marine equipment. As a consumer, let’s take a closer look below. Marine compressor How to choose!

 How to Choose a Marine Compressor

  1. The occasion and conditions of gas usage should be taken into account. If the gas-using area is narrow (e.g., on ships or vehicles), a vertical model should be selected. If the gas-using location involves significant distance changes (over 500 meters), a mobile model should be considered. If the site of use cannot be supplied with electricity, a diesel-engine-driven model should be chosen. If there is no tap water available at the usage location, a air-cooled model should be selected.

  2. Consider the operational safety of marine compressors. Air compressors are machines that operate under pressure, and their operation is accompanied by rising temperatures and increased pressure. Therefore, operational safety should be given top priority. The state implements a standardized “two-permit” system for air compressor manufacturing—namely, an air compressor production license and a pressure vessel manufacturing license (for gas storage tanks). Consequently, when selecting an air compressor product, it is essential to rigorously verify the presence of these two permits.

  3. Displacement is one of the primary parameters of marine compressors. The air volume of the selected air compressor should match the required displacement, with an additional margin of about 10%. If the air consumption is high while the compressor’s displacement is low, once pneumatic tools are started,... Marine compressor The exhaust pressure would then drop significantly, making it impossible to power pneumatic tools. Of course, relentlessly pursuing a large displacement is also a mistake, because the larger the displacement, the more powerful the motor required for the compressor—resulting not only in higher costs but also in wasted capital and energy during operation.

  4. Consider the quality of compressed air. Generally, compressed air produced by marine compressors contains a certain amount of lubricating oil and a certain amount of water. In some applications, both oil and water are prohibited. In such cases, not only should you pay close attention to the selection of the air compressor, but you should also, if necessary, add auxiliary equipment.

  5. Consider the high or low exhaust pressure and exhaust volume. Typically, marine compressors operate at a pressure of 0.7 MPa. Currently, air compressors with an exhaust pressure of 0.5 MPa are available on the market; from a usage perspective, however, this is not advisable, as the pressure margin is too small for pneumatic tools. Moreover, if the air delivery distance is even slightly longer, such compressors become impractical. If users require compressors operating at pressures exceeding 0.8 MPa, it is generally necessary to have them custom-made rather than resorting to forced pressurization, in order to avoid potential accidents.

  6. Air-cooling and water-cooling methods each have their own characteristics. Air-cooling accounts for over 90% of small compressors both domestically and internationally. This is because air-cooling designs are simple and do not require water during operation. The drawbacks of water-cooled compressors include: the need for a complete water supply and drainage system, resulting in high initial investment; shorter lifespan of water-cooled coolers; susceptibility to cylinder freezing in northern winters; and significant water wastage during normal operation.

  7. When selecting the displacement of an air compressor, one should also take into account peak demand, normal demand, and minimum demand. If the minimum demand is high but both the normal and peak demands are relatively low, a common practice abroad is to connect several smaller-capacity air compressors in parallel to achieve a larger total displacement. These compressors can be started one by one as the air consumption increases. This approach not only benefits the power grid but also helps conserve energy.

Hong Kong dollar

Miss Deng:18922776417
Mr. Huang:13450460020
Mr. Zhang:13922978523

img

Email:1536214764@qq.com/ 673047694@qq.com
Company Address: No. 15, Alley 2, North of Lianhe Road, Fulong Village, Shipai Town, Dongguan City

Copyright © 2021 Dongguan Ganghui Refrigeration & Mechanical Equipment Co., Ltd.

Power by:www.300.cn | SEO | Privacy Policy 

Business license