港汇 Welcome to the official website of GangHui!

Dongguan Ganghul Refrigeration
Electromechanical Equipment CO., Ltd.

Professional sales ofvarious brands of air-conditioning compressors, refrigeration
compressors and various brands of chillers, dryers and refrigeration accessories

Image name

Miss Deng:18922776417
Mr. Huang:13450460020
Mr. Zhang:13922978523

What should you pay attention to when using a hot glue gun?

22-09-13

What should you pay attention to when using a hot glue gun?

In a hot glue gun, glue sticks are heated at high temperatures to melt and bond materials, meeting the requirements of various production lines. Typically, hot glue guns can be used continuously at 300°C without deforming, making them highly durable and long-lasting.

So, what should we pay attention to when using a hot glue gun?


1. Please preheat the glue gun for 3-5 minutes before use.


2. Please keep the surface of the hot melt glue strip clean to prevent impurities from clogging the gun nozzle.


3. When not in use, please keep the glue gun upright on the table—do not place it upside down. Otherwise, glue may spill out, causing the glue gun to burn out and the glue stick to thicken and get stuck at the gun’s inlet, making it impossible to apply glue.

 Hot glue gun

4. When there is still glue left in the hot glue gun, try not to remove the glue tape from the gun.


5. If the glue sticks in the glue gun start to flow backward, immediately stop using it, clean it thoroughly, and then resume use.


6. If the glue gun has been heated continuously for more than 10 minutes, please disconnect the power supply.


7. If you find that the glue gun is unable to dispense glue during use, please check whether the glue gun is heating up.


8. Avoid using the glue gun in humid environments, as moisture can affect its insulation performance.


9. Both the gun nozzle and the melted glue are very hot—around 200 degrees Celsius—so, apart from the handle, all other parts should not be touched.


10. Fine filaments often form inside hot glue guns and keep getting pulled. Actually, as long as a metal object at a sufficiently high temperature comes into contact with the filament, the filament will break—so all you need to do is let the tip of the hot glue gun touch the pulled-out filament.


Things to note

1. Please keep the hot melt glue strip surface clean to prevent impurities from clogging the gun nozzle.

2. Before use, please check whether the power supply is connected and whether the glue gun used previously can smoothly dispense glue.

3. During use, the hot glue gun reaches a high temperature; therefore, it is strictly prohibited to touch the nozzle or the melted glue with your hands.

4. Avoid using a hot glue gun in damp environments, as this could lead to electric shock.

5. If the glue gun is left unattended for more than 15 minutes after continuous heating, please disconnect the power supply. This will help extend the service life of the glue gun.


Hong Kong dollar

Miss Deng:18922776417
Mr. Huang:13450460020
Mr. Zhang:13922978523

img

Email:1536214764@qq.com/ 673047694@qq.com
Company Address: No. 15, Alley 2, North of Lianhe Road, Fulong Village, Shipai Town, Dongguan City

Copyright © 2021 Dongguan Ganghui Refrigeration & Mechanical Equipment Co., Ltd.

Power by:www.300.cn | SEO | Privacy Policy 

Business license