港汇 Welcome to the official website of GangHui!

Dongguan Ganghul Refrigeration
Electromechanical Equipment CO., Ltd.

Professional sales ofvarious brands of air-conditioning compressors, refrigeration
compressors and various brands of chillers, dryers and refrigeration accessories

Image name

Miss Deng:18922776417
Mr. Huang:13450460020
Mr. Zhang:13922978523

Evaporation temperature, condensation temperature, subcooling temperature, intermediate temperature, suction temperature, discharge temperature

22-11-11

Evaporation temperature, condensation temperature, subcooling temperature, intermediate temperature, suction temperature, discharge temperature

Evaporation temperature: The temperature at which the refrigerant in the evaporator boils and vaporizes under a certain pressure is called the evaporation temperature.

Condensing temperature: The temperature at which a gaseous refrigerant in the condenser condenses into a liquid under a specific pressure is called the condensing temperature.

Subcooling temperature: The temperature to which a liquid refrigerant, after condensation, is cooled under condensing pressure to a temperature below its condensing temperature is called the subcooling temperature.

Intermediate temperature: In a two-stage compression system, the saturation temperature of the refrigerant at the intermediate pressure in the intercooler is referred to as the intermediate temperature.

Suction temperature: The suction temperature of the compressor can be measured using a thermometer located upstream of the compressor’s suction valve. Generally, the suction temperature is higher than the evaporating temperature; the difference between the two depends on the length of the suction line and the insulation condition of the piping. Typically, the suction temperature should be 5 to 10 degrees Celsius higher than the evaporating temperature. Adjusting the refrigerant flow rate can help regulate the superheat.

Discharge temperature: The discharge temperature of the compressor can be measured using a thermometer installed on the discharge line. The discharge temperature is directly proportional to the pressure ratio (of suction and discharge) as well as the suction temperature. The higher the suction superheat and the greater the pressure ratio, the higher the discharge temperature will be; conversely, the lower these factors are, the lower the discharge temperature will be. Generally, the discharge pressure is slightly higher than the condensing pressure.

Hong Kong dollar

Miss Deng:18922776417
Mr. Huang:13450460020
Mr. Zhang:13922978523

img

Email:1536214764@qq.com/ 673047694@qq.com
Company Address: No. 15, Alley 2, North of Lianhe Road, Fulong Village, Shipai Town, Dongguan City

Copyright © 2021 Dongguan Ganghui Refrigeration & Mechanical Equipment Co., Ltd.

Power by:www.300.cn | SEO | Privacy Policy 

Business license