Detailed Explanation of the Features, Principles, Applications, and Specific Products of Industrial Valves for Ammonia
23-02-01
Ammonia is classified as a flammable and hazardous gas, typically stored in dedicated high-pressure tanks. During use, an ammonia-specific industrial valve is employed to reduce the pressure difference of the ammonia gas to the range required by the laboratory; further fine adjustments are then made using additional control valves to ensure that the gas enters the application system smoothly. Since the commonly used pressure-regulating valve is an ammonia-specific shut-off valve, it is generally referred to as an "ammonia valve."
Industrial valve bodies for ammonia applications generally use cast steel components and stainless steel plates. Selecting industrial valve bodies for ammonia service requires stringent standards: the oil passage plates must be free of sand holes, the valve stem must be leak-proof, and the sealing performance must be excellent. For ammonia applications, it is preferable to choose oil passage plates that are either precision-cast or forged.
Structural Features of Industrial Valves for Ammonia Use
1 Construction
The high-pressure chamber of the industrial valve body for ammonia is connected to the gas cylinder, while the low-pressure chamber serves as the gas inlet and outlet and is connected to the application system. The high-pressure gauge displays the pressure of the gas stored in the cylinder, and the inlet and outlet pressures shown on the low-pressure gauge can be adjusted using the adjusting nut.
The closing member of the industrial valve for ammonia is a plug-type disc valve, with a flat or spherical sealing surface. The valve disc moves in uniform linear motion along the fluid’s axis.
For ammonia industrial valves, the stem movement can be either of the following types: the hidden-stem type with reverse sealing (the stem is adjustable, while the main shaft remains fixed). Alternatively, ammonia industrial valves may employ an exposed-stem design with reverse sealing, using elastomeric molded PTFE as the filler material. In this configuration, the rotational sealing performance improves as the working pressure of the medium increases, ensuring zero leakage from the stem and eliminating the need for maintenance. Another option is the exposed-stem, adjustable rotating-stem type (where the main shaft rotates and moves up and down together with the stem; the bolts are mounted on the oil passage plate).
The industrial valve body for ammonia is designed solely for full opening and closing and cannot be used as a regulating or throttling valve.

2. Characteristics of Industrial Valve Bodies for Ammonia Use
(1) The overall structure is simpler than that of a gate valve, making production, manufacturing, maintenance, and replacement all relatively convenient and quick.
(2) The protruding surface is resistant to damage and abrasion, has a compact structure, and during opening and closing, there is no relative sliding between the valve disc and the protruding surface of the oil passage plate. As a result, damage and abrasion are relatively minor, offering high sealing performance at an excellent cost-to-performance ratio, and ensuring robustness and durability.
(3) During opening and closing, the valve flap has a short stroke; therefore, the overall height of a globe valve is relatively lower than that of a gate valve, but its structural length is longer than that of a gate valve.
(4) High flow resistance; significant force is required to open and close.
(5) Not suitable for media containing particulate matter, with relatively high viscosity, or prone to coking.
(6) The adjustment characteristics are relatively weak. Industrial valves for ammonia are classified according to the position of the valve stem threads into pipe-thread type and threaded type. Based on the flow direction of the medium, they can be further categorized as straight-through type, direct-flow type, and angle type. According to the sealing mechanism, globe valves can be divided into rotary-seal globe valves and bellows-seal globe valves.
Principle of Industrial Valve Bodies for Ammonia Use
The industrial valve body for ammonia is a mandatory, sealed-type valve; therefore, when the valve is closed, pressure should be applied to the valve disc to ensure that the sealing surfaces remain leak-free.
When the medium flows into the valve from below the valve disc, the frictional resistance that the actuating force must overcome consists of the friction between the valve stem and the packing, as well as the thrust generated by the medium pressure. The force required to close the valve is greater than that needed to open it; therefore, the diameter of the valve stem’s bore must be somewhat larger. Otherwise, a common failure—bending of the valve stem—may occur.
In recent years, since the introduction of self-sealing ammonia-service industrial valves, the medium flow in ammonia-service industrial valves has been redirected to enter the valve cavity from above the valve disc. Under the influence of the working pressure of the medium, this design requires relatively little force to close the valve but a significantly greater force to open it, allowing the diameter of the valve stem to be reduced accordingly. At the same time, under the influence of the medium, valves designed in this manner exhibit a higher degree of tightness.
For liquid chlorine shut-off valves, the flow direction must always be from top to bottom. When the shut-off valve is opened, the opening height of the valve disc—corresponding to 25% to 30% of the outer diameter—already represents the maximum flow rate, indicating that the valve has exceeded its fully open position. Therefore, the precise opening position of the shut-off valve should be determined by the travel of the valve disc.
Previous:
Miss Deng:18922776417
Mr. Huang:13450460020
Mr. Zhang:13922978523
Email:1536214764@qq.com/ 673047694@qq.com
Company Address: No. 15, Alley 2, North of Lianhe Road, Fulong Village, Shipai Town, Dongguan City
Copyright © 2021 Dongguan Ganghui Refrigeration & Mechanical Equipment Co., Ltd.
Power by:www.300.cn | SEO | Privacy Policy
Welcome to the official website of GangHui!